You can apply this to anything you can iron on with a very HOT iron. Do not apply to materials that melt under hot temperatures.
1: Put your iron on the hottest setting, this is usually the cotton setting and TURN OFF THE STEAM (this is VERY IMPORTANT!)
2: Place your item on a hard flat surface and smooth out the area you are applying the transfer to.
3: Place and position transfer on your item
4: Place a pillow case on top of the transfer and item to protect your item
5: Press iron on heat transfer firmly for 1 minute on each section of the transfer.
6: Wait for your item to cool
7: remove transfer
TIP: If transfer is not removing easily repeat steps 4-6. If it is not removing easily the glue did not melt enough so it needs more heat and pressing in order to bond.